Component based system development offer great flexibility and improvements in large software systems development. Developer of system needs not to start from scratch, but by using Commercial-Off-The-Shelf (COTS) component he can integrate the whole system applying the glue code with component interface. Most of the COTS-components are black box in nature because of source code unavailability, which makes the testing process difficult in development leading to greater testing time and higher cost.
Using the test case prioritization technique, we can reduce the cost and time of testing. Most of the test case prioritization techniques proposed in previous works applies source code information as prioritization factors because those are based on OOT technology. In CB-system, it is proved difficult to apply those direct measurement factors for testing.
Here, in this paper, I propose test case prioritization technique for component based system.
The technique is black box in nature because it incorporates indirect measure of factors, namely; 1) Criticality of the Component (COC) and 2) Fault Proneness of Component (FPcomp). Criticality of the Component is the direct product of Component Dependency Density and Functional Importance of Component. I have proposed “ Component Dependency Density (DDcomp) matrix” for the component and it can be measured using Component Dependency Graph. After, prioritization value for each test case can be computed using the “ Component Prioritization Value (CPV) matrix”.
As a proof of concept I conducted a simulated case study with ATM system and testing process is performed using three different priority schemas.
Case study and results prove the usefulness of the technique in reducing cost of testing and improving reliability of system detecting the severe faults at early stage of testing. Key Words: Component based system, black box testing, Test Case prioritization technique, Criticality of Component, Fault proneness, Component Dependency Density ACKNOLEDGEMENT
First, I offer my sincerest gratitude to my supervisor, Associate Professor Richard Lai, who has supported me throughout my thesis with his patience and knowledge. In addition, his constant feedback, encouragement, guidance and support at every phase of writing this thesis from the initial to the final level enabled me to develop an in-depth understanding of the research area. Second, I am thankful to Associate Professor Ben Soh, who has encouraged me for this thesis, provided me the guidance in thesis writing and empowered my critical reading and writing skills.
Component based software engineering (CBSD) has become recognized as such a new discipline of software engineering, offering convenience as well as fast design/implementation.
Component-based software engineering (CBSE) shifts the emphasis from programming software to composing software systems. Opposite to OO-techniques, which are white box in nature, COTS components are black box in nature due to unavailability of source code, resulting in complexity of testing, verification and validation. Without source code, many OO testing techniques will not be applicable.
The greatest challenges in component-based software development are that suitable ready-made components are difficult to find, and if they are found, they are not necessarily of good quality. In addition, components have different dependencies between them, source code is seldom available, and the target context of the components is unknown. The component developer tests the component for its correct functionality and implementation logic via unit testing.
When, system integrator integrates the system combining number of components, the focus of testing is the required functionality supposed to provide by the component.
Integrator tests the functional aspect of subject component. System Integration tester uses integration testing and system testing methods to find the faults. In CB, testing, main focus is on interfaces, which are only external parts of components. Interface supposedly suffers from component synchronization problems, coupling complexity and runtime events generated by the integration of components.
In previous work, a number of techniques were proposed for testing component-based systems, among which most are code based or model based. Same time, testing is the most time and resource consuming process in any software development.
To reduce the cost of testing without decreasing the effectiveness is the critical management problem for today’s entrepreneurs. Answer is to prioritize the test cases so, which are more important run earlier in test process. There can be different goals of the test case prioritization such as increasing reliability or performance of system, reducing cost per test case. Based on the aim of testing, the prioritization factors are selected and test cases are sort out using those factors.
Actually, regression testing is the most time /cost consuming process, but important aspect of testing.
Many techniques were proposed in OO domain to prioritize the test cases for regression testing. Those techniques are code based and difficult to apply in component based development environment. In OO, measure of factors directly related to complexity and fault severity are used, where as in CBS we hardly have such measures, so we have to depend on the indirect measures such as fault proneness of component or complexity of integration. In CB-system, it is obvious that as the number of interfaces used for component integration increases the complexity of system integration increases.
One component couples with more than one component to provide specific functionality. As the dependency of component is higher, the component is more prone to fault. Fault severity is internal characteristic of component dependency. Here, this paper proposes a test case prioritization technique in component environment. The factors I am using are criticality of component and fault proneness of component.
Based on above factors the metrics/equation of criticality of component is proposed to measure the importance of component for testing purpose.
Case study is provided to evaluate effectiveness of techniques. The paper is organized as below: section 1 and 2 provides the introduction and background related to object oriented techniques and their limitation compared to component based system development techniques. Section 3 presents survey of previous techniques for test case prioritization based on applied prioritization factors. Section 4 describes the various complexity metrics for component based system and makes comparison between them.
Section 5 compares the various techniques and metrics to measure the fault proneness.
Section 6 presents the proposed technique for test case prioritization in component based black box testing. New matrix called Dependency density of Component (DDcomp) is proposed and based on that proposed technique is described which is based on two prioritization factors namely: 1) Criticality of Component and 2) Fault Proneness of Component interactions. Section 7 presents the experimental case study for validation of proposed technique. Section 7.
1, 7. 2, and 7. 3 orderly present the system under test, experiment setting/ factor collection process and analysis of result.
At last, section 8 presents the conclusion and future work. 2. BACKGROUND Object oriented technology and software design principals entered in the mainstream software development to mirror /mimic the behaviour of the complex real word systems outside.
The root principals of the OO techniques are incorporating states and behaviour of the subject system. Therefore, it heavily rely on the how objects are connected with each other rather than Why? Examples relations are associations, inheritance, polymorphism, and uses, which most of the times, shadows the understating of why object are relates to each other.
In Response to above phenomenon , the Object technology abstract out the continuous nature of real world systems by incorporating time and space in discrete quantities. Component based technology, a subset, special case of Object oriented technology views each logical particle of the software system as a unique component. Component can be a class, object, module or subsystem, which functions independently irrespective of the other component of the system, easing the development process of large complex software. We can build the system by combining the components from different venders at reduced cost and time.
However, the views of the both techniques are different by nature: an object technique relay on relation between objects and is white box in nature. Contrast CB systems, which relays on functionality of the component, making the component as black box. Due to unavailability of source code, the white box testing of COTS –component is nearly impossible that is why developer has to depend on functional black box testing. There are numbers of methods, techniques and, frameworks for testing both OO and CB systems, which are used at various level of software development process such as requirement capturing, design and coding.
Still, the lack of methods and techniques combining both techniques in a single domain create hurdles when testing the software. Here, in this paper, I am trying to contribute to solve the above problem by applying test case prioritization method using the factors influencing the correctness and performance of software.
3. 1. LIMITATION OF OBJECT ORIENTED TECHNIQUES Object oriented software development framework is the general methodology now day people are using to build each type of software products because of its principal of abstractness and modularity.
When using in the special cases such as embedded real-time systems or component based systems , which has special problem space and development requirements the limits of OO technique come in to focus and developer has to work keeping in the mind the limitations of Object oriented techniques. The real world behave as continuum. Time and space are the un-abstract-able parameters in real world systems.
The status of the system at particular time instance depends on the one or more events occur simultaneously on component /object, so it is relative in nature .
Opposite of above fact, the OO technique cannot capture the object’s continuous behaviour at flow of time. For Examples , there are number of observations noted in the papers such as interaction of electric and magnetic field, thermal conductivity in thermodynamics , and gyroscopic effects on spinning objects , which lights the limitations of object techniques. Focusing on all above examples, component based techniques most suites the problem characterization, where the completeness of integration is most important.
CB technique provides us not fully but partial flexibility to define relative time measures at interaction of component, but it is out of focus of the paper here. Adding to this, when modelling the OO-system , OO-models, both static and behavioural, focuses on system modelling issues, but researches and surveys indicated that the development processes are equally as prevalent as modelling difficulties.
Again, the Object oriented technique is by nature white box, source code availability allows us to test how object interacts with one another.
Statements, functions, classes, relations, implementation logic are the most focused points when testing the OO-Systems. Opposite to this, Commercial-off-the-shelf (COTS) components are black box in the nature. System integrator has not any knowledge of logic or, implementation of component, making impossible to white-box test the component. Now, the integrator can only access the interface/port of the components to verify the validity of component has required functionality. Method of Black box testing is most promising approach when testing the CB-Systems in such environment.
The driver uses a data-driven approach in (Figure 1b) to interact with the rest of the application software, as opposed to the more traditional OO process driven approach shown in (Figure 1a). The real power of CB methods comes from the reusability of software component. The idea of reusing software embodies several advantages. It improves productivity, maintainability, portability and quality of software systems. A reusable component can be seen as a box, which contains the code and the documentation .
Component can be Black Box, Glass-box or, white box in nature. Most of the COTS components are black box or glass-box in nature. In black box reuse, the reuse sees the interface, not the implementation of the component. The interface contains public methods, user documentation, requirements and restrictions of the component. In glass box reuse, the inside of the box can be seen as well as the outside, but it is not possible to touch the inside.
This solution has an advantage when compared to black box reuse, as the reuse can understand the box and, its use better.
The importance of component reusability depends on some quality factors such as existence of Meta-Information , rate of component’s observe-ability , rate of component’s customizability and, self- completeness of component’s return value. The CB system development has become more difficult because of the increasing complexity, reduced development time and reduced budgets. So correctness and reliability are very important topics in this field of engineering . State coverage and transition coverage are two popular State-based testing techniques.
Suman  has presented an approach to synthesize the state models of components without using its source code or other associated models. State models of the components are important for state-based regression testing of component-based applications. State-based bugs are difficult to detect using traditional testing techniques. Bringmann  has proposed a test method using “ time partition” that enables the systematic definition of executable test cases for testing the continuous behaviour of component based automotive embedded systems.
This method is based on a graphical notation for test cases, which is easy to understand, and powerful enough to express complex, fully automated tests. Another Model based component regression testing method is proposed by Lalchandani  which covers dynamic slicing algorithm to discover the bugs in the architecture models produced over design time by converting them to Architecture Component Dependence Graph(ACDG).
Several empirical studies were also conducted to highlight the component integration issues and techniques in component integration testing process.
Raheman surveyed nearly all of the Component integration testing techniques such as 1) built-in testing (BIT); (2) testable architecture; (3) metadata-based; (4) certification strategy;(5) User’s specification-based testing. Based on this finding, we can evolute any other component based integration testing technique, which are not invented yet. We can also compare difference /similarity between the methods. There may be various use of that categorization which depends on user of it. Selection of approach to test the component depends on various factors and assumptions.
Tables in appendices will help the user/developer to choose the combination of approaches for testing purpose. For detailed review on these techniques, please refer APPENDIX 1or . 3. 3. RELATED WORK Various techniques and empirical studies have reported on both software testing and test case prioritization in recent years. Due to wide spread popularity of Object Oriented techniques in software-system development, most of the testing techniques are on code coverage.
Coverage-based testing methods are by nature, white-box and, provides the details about which software part of the functionality has been covered.
Clancy produced generic testing process guidelines by his own experiments, based on working on NASA flight Softwares and proposed test process improvements for future missions. To minimize the overhead of monitoring system at runtime Wu  developed code coverage based instrumentation technique. Schulz built up the simulation based multi-level testing technique for embedded system on the focus of the number of the views of the system such as behaviour, performance etc.
Litian extended agent oriented methods to develop individual testing system to test subject system, but the disadvantage is additional overhead of managing the testing system itself. Zhen  used formal methods to test embedded real-time systems.
Based on the requirement-coverage of test cases, Researchers has extended the UML static and dynamic models such as sequence diagrams, activity diagrams, architecture diagrams, and use case diagrams [15-18] .
In addition, numbers of Graph oriented modelling based approaches are in development [19-23] to provide the flexibilities and easiness in better understanding / testing subject software requirements and functionalities. Korel  compared the drawback-benefit of both code-based and model-based testing techniques. Bouquet  defined the subset of UML and OCL expressions for model-based testing purpose, which is based on class, object and state-machines. Wu developed integration testing strategy for component-based systems based on UML interaction diagrams focusing on context and content dependent relationship.
Pasareanu  advanced the model based analysis and test generation strategies using UML for heterogeneous systems such as flight software to produce common intermediate representation for flight-software module produced using different modelling environments.
Test case prioritization techniques proved important to reduce test case cost and to improve reliability. Most of the prioritization techniques have goal of improving the rate of fault detection in testing process. Test case prioritization process mainly focus on the requirement/goal of the testing process. the goal can be performance, safety, etc. oth code and requirement based prioritization techniques works on some specific factors such as varying requirement priorities/cost[28, 29], customer priorities, implementation complexity, fault proneness of module[28, 30, 31]. All above techniques are code-based and white box in nature.
There are also techniques based on historical test case performance data, and coverage of interaction . Previous researches also provide the information about the model and algorithm based both white box[35, 36] and black box[37, 38] test case prioritization techniques .
Korel  proposed system model based test case prioritization techniques for system testing. To evaluate the effectiveness and to make comparisons of the prioritization techniques several empirical studies evaluated [40-43]. Do  has assessed the advantages/ disadvantages of the mutation faults in prioritization methods. All above techniques are applicable to OO systems and, there is a lack of work on component based testing and test case prioritization techniques.